Upgrade your BIOS

Please refer the following steps to upgrade your BIOS :

Step 1. Make a Boot disk from the system .

For Win9X , please type C:\> format a:/s from the DOS prompt .

For WinME , please make a boot disk from Control Panel -> Add 15515f520p / Remove

Program -> make boot disk . After finishing boot disk , please remove autoexec.bat

and config.sys .

For Win2000 , you can't make a boot disk . Please make boot disk from other system .

For WinXP , please right click on floppy (A:) from my computer item , select format item ,

select Create an MS-DOS startup disk

Step 2. Extract the BIOS file that you download from the ACORP's website, you will get AWD808.EXE And XXXXXX.BIN , please copy them to the boot disk .

Step 3. Please reboot your computer with this boot disk .

Step 4. Then Type AWD808.EXE and press [ ENTER ] under DOS mode .

Step 5.A window will appear and ask you to type the complete BIOS file ( xxxxxx.BIN ) and

press [ ENTER ] .

Step 6.Then it will ask whether you save the old BIOS file , you can choose the YES or NO .

Step 7.Then it will ask you whether want to program it , please choose YES .

Step 8.The BIOS will start to upgrade

Step 9.When you have successfully flashed the BIOS then press the[ F1] to reboot the

Computer and hit [DEL] to enter the BIOS CMOS SETTING . Select " LOAD S-

STUP DEFAULTS " set as YES . Then save and exit the setting

Notice  :

In order to prevent your system from hanging up during flashing BIOS , please check

the new BIOS match your model name and current BIOS version .

In order to protect your motherboard , please don't turn off your computer during the

flashing or it will damage your BIOS ROM .