Welcome to the Loops SynthBlender

Welcome to the Loopmasters

SynthBlender

This Combinator patch is a great template for building truly huge synth's.

The patch contains 2 Malstrom and 2 Subtractor synth's fed to a 14/2 mixer whereby you can then adjust levels 13313f518n or add FX

The synth has been programmed with its own voice already to get you started from here you can either load in your own/downloaded or even Reason sound bank patches and goes without saying you can adjust the one's already loaded

Guide to using DRUMgrain

The DRUMgrain can be activated either by pressing play on your sequencer or by hitting the Run Pattern Devices on combi patch.

The Redrum player has been loaded ready with sounds and patterns but don't let it stop you putting in your own sounds or creating new patterns

ROTORY 1 = PHASER ON Will add Phaser effect to whole combi instrument

ROTORY 2 = DELAY STEPS This will alter Step type setting on the RV700 reverb unit

Marked DELAY

ROTORY 3 = CHORUS RATE This will alter the chorus"rate" of the CF-101

ROTORY 4 = SCREAM AMNT Will turn up Aux send 4 on mixer allowing you to hear the distortion effect from whatever synth's it has been applied

BUTTON 1 = REVERB ON will turn on the RV700 marked REVERB. As long as at least 1 mixer channel has AUX send 1 turned up you will hear this effect

BUTTON 2 = DELAY ON This button will mix Delay to any channel on mixer that has had the AUX 2 knob applied

BUTTON 3 = CHORUS ON This button will mix Chorus effect to any channel on mixer that has had the AUX 3 knob applied

BUTTON 4 = DISTORTION GATE This button will allow the Matrix sequencer to run and will interact with the P2 setting of the Sream distortion

Have fun and remember to checkout our website for Quality Pro samples Patches and more online at www.loopmasters.com.