Documente online.
Zona de administrare documente. Fisierele tale
Am uitat parola x Creaza cont nou
 HomeExploreaza
upload
Upload




PseudoSam 80z Assembler

technical


PseudoSam 80z Assembler Manual V1.2.02

Copyright(c) 1986,87 PseudoCode



Disclaimer:

PseudoSam 80z is distributed as is, with no guarantee that it

will work correctly in all situations. In no event will the

Author be liable for any damages, including lost profits,

lost savings or other incidental or consequential damages

arising out of the use of or inability to use these

programs, even if the Author has been advised of the

possibility of such damages, or for any claim by any other

party.

It is the users reponsibility to back up all important files!

See copyright information in appendix B

Table of Contents

Chapter 1 PseudoSam 80z assembler vs. the Zilog assembler.

Chapter 2 Running the assembler program.

Chapter 3 Assembler statement syntax.

Chapter 4 Data types.

Chapter 5 Expressions.

Chapter 6 Assembler Directives.

(also known as assembler pseudo-opcodes, or pseudo-ops)

Appendix A ASCII character set.

Appendix B Copyright and registration information.

Appendix C Description of Files.

Appendix D Bug Reporting Procedure.

Appendix E Using PseudoSam 80z on "Compatible" Systems.

Chapter 1 PseudoSam 80z assembler vs. the Zilog assembler

All PseudoSam(Pseudo brand Symbolic AsseMbler) assemblers conform to

a common syntax based on the UNIX system V assembler syntax. By

conforming to this Pseudo standard, conflicts with the manufacturers

syntax are created. Below is a brief and incomplete list of those

conflicts.

Zilog format PseudoSam format

<identifier> equ <expression> .equ <identifier> , <expression>

<identifier> set <expression> .set <identifier> , <expression>

Has Macro capability No Macro capability at this time

* The difference between the Zilog and the PseudoSam name

of an assembler directive can be circumvented by the .opdef

directive.

example

.opdef eject,.eject ;defines eject to be synonymous with .eject

.opdef fcc,.db ;fcc will now form constant characters as it

;should.

* A file syn.asm is distributed with the assembler with some useful

redefinitions.

Unix system V is a trademark of AT & T.

Chapter 2 Running the assembler program

1. Command line switch setting and source file specification.

Assuming the user has an assembly language source file called foo.asm

type the following command:

a80z foo

The assembler will assemble the program foo.asm using the default

assembler switch settings. the following files will be generated

by the assembler:

foo.lst ;assembled listing shown the code conversion and

; any errors that where discover by the assembler.

foo.obj ;assembled object code in Motorola Hex format.

** for a list of switch setting see the .command assembler directive

description in chapter 6.

*** The assembler uses the following temporary file names.

z0z0z0z0.tmp

z1z1z1z1.tmp

ANY files with these names will be DESTROYED by the

by the assembler.

Chapter 3 Assembler statement syntax

1. Assembler Statements

Assembler statements contain from zero to 4 fields as shown in

following.

<label> <opcode> <expressions> <comment>

All fields are optional, but they must be in this order.

A. Labels (<label>) are symbolic names that are assigned the starting

address of any code generated by the opcode and or expressions

of the line containing the label declaration.(see section 2).

B. Operation codes(<opcode>) tell the assembler what machine instruction

to generate, or what assembler control function to perform.

The operation code also tells the assembler what expressions are

required to complete the machine instruction or assembler directive.

(see chapter 6).

C. Expression requirements are set by the opcode(see the microprocessor

manufacturers reference manual or the assembler directives chapter

for individual opcode requirements).(see chapter 5).

D. Comments are notes written by the programmer to explain what the

program is trying to accomplish. Comments generate no code.

(see section 3).

2. Labels

Labels can be unlimited in length, but only the first eight characters

are used to distinguish between them. They must conform to the

following syntax.

<label> -> <identifier>':'

<identifier> -> <alphabetic character> <identifier character string>

<alphabetic character> -> character in the set ['A'..'Z', 'a'..'z', '.']

<identifier character string> -> any sequence of characters from the

set ['A'..'Z','a'..'z', '.', '0'..'9']

example

abc: ;label referred to as abc

a c: ;not a valid label

foo: ;label referred to as foo

.123: ;label referred to as .123

* Case makes NO difference!

d: ;is the same as

D:

3. Comments

Comments must start with a semi-colon ; and are terminated

by an end of line or file( <lf>(^J) or <sub>(^Z) ). An end

of line is inserted by typing the enter or return key by

most text editors.

Chapter 4 Data types

1. Integers

Integer constants can be specified in any of the following forms:

A. Binary

b'bb ;bb=string of binary digits

B'bb

B. Decimal

ndd

d'dd ;n=nozero decimal digit

D'dd ;dd=string of decimal digits

C. Octal

0qq ;qq=string of octal digits

o'qq

O'qq

q'qq

Q'qq

D. Hexidecimal

0x'hh ;hh=string of hexidecimal digits

0X'hh

h'hh

H'hh

x'hh

X'hh

Examples:

077 ;octal number 77 = decimal 63

b'0101 ;binary number 101 = decimal 5

77 ;decimal number 77 = octal 115

h'ff ;hexidecimal ff = decimal 255

2. Strings:

Strings consist of a beginning quote " followed by any reasonable number

of characters followed by an ending quote ". Control characters and double

quotes " and backslash \ may not be used in strings directly. These

special characters are included by using a special escape sequence which

the assembler translates into the appropriate ASCII code.

Note: Strings may not be used in expressions!

Although character constants may(see below).

Escape sequences

"\"" string containing "

"\\" string containing \

"\'" string containing '

"\0" string containing null

"\n" string containing linefeed

"\r" string containing carriage return

"\f" string containing formfeed

"\t" string containing horizontal tab

"\nnn" string containing the ASCII character who's code is o'nnn

(nnn are octal digits).

* see appendix A for ASCII codes.

3. Character Constants:

Character constants consist of a single quote ' followed by

a character or an escape sequence(see above) followed by a

single quote '.

example:

'A' = ASCII character value for the letter A = 65 (decimal);

'\''= ASCII character value for the character ' = 39 (decimal).

Character constants are treated as integers by the assembler and

are valid where ever an integer value is valid.

example:

'A' + 1 = 66

* see appendix A for ASCII codes.

4. Symbolic values

Symbolic values are generally labels, but may be any identifier

assigned an integer value(using .set or .equ pseudo-ops).

As a special case the symbol * when used as an operand in an

expression denotes the value of the location counter (the value

the program counter will have during operation) at the beginning

of the current line.

Chapter 5 Expressions

All expressions evaluate to integer values modulo 65536(2^16) and are

written in infix notation(the way you normally write them). Operators

provided are grouped below in order of precedence.

1. (unary)

~ logical bit wise complement(not) of its operand(one's complement).

- arithemetic complement, or negation(two's complement).

2. (binary)

* integer multiply (two's complement).

/ integer divide (two's complement).

% modulus (result is always positive)

>> logical shift right (left operand shifted right operand times).

<< logical shift left (left operand shifted right operand times).

~ equivalent to A or ( ~B ).

3. (binary)

| logical bitwise or(inclusive-or) of two operands.

^ logical bitwise exclusive-or of two operands.

& logical bitwise and of two operands.

4. (binary)

+ addition (two's complement).

- subtraction (two's complement).

Since this version does not generate relocatable code there exists only

one "type" of operand that can be in an expression. So anything goes

except divide by 0(1 will be substituted ).

examples:

-1 = h'ffff (two's complement notation).

-1 >> 8 = h'00ff

-1 << 8 = h'ff00

3 / 2 = 1

6 / 2 = 3

5 / 0 = 5

-2 / 1 = -2

-3 /-2 = 1

2 * -3 = -6

b'00 & b'11 = 0

b'11 & b'10 = 2

2 * b'01 & b'10 = 2

b'01 ^ b'11 = 2

b'01 | b'11 = 3

Notice that spaces are ignored in expressions.

Chapter 6 Assembler Directives

(also known as assembler Pseudo-opcodes)

The assembler recognizes the following directives:

directive section description

.command 1 ;set assembly options(similar to command line options).

.org 2 ;set program origin.

.equ 3 ;equate an identifier to an expression(permanent

; assignment).

.set 4 ;equate and identifier to an expression(temporary

; assignment).

.rs 5 ;reserve storage(memory) space.

.db 6 ;define byte.

.dw 7 ;define word(16 bit).

.drw 8 ;define reversed word(16 bit).

.eject 9 ;form feed in listing

.page 10 ;align location counter on 256 byte memory

; page boundary.

.end 11 ;end of program

.opdef 12 ;equate an identifier with another identifier.

.segment 13 ;define a memory segment.

<segment name>

14 ;select segment <segment name> as current segment.

.null 15 ;this is a comment statement.

1. .command <optionlist> ;allows the programmer to set option switches

;in the same manner as on the command line.

;(the command line is the line typed to run

; this program).

<optionlist> -> <option> ' ' <optionlist>

<optionlist> ->

<option> -> '-'<available option>

<option> -> '+'<available option>

<available option> -> 'a'<decimal number> ;Hex hode format.

;1 => Intel Hex.

;2 => Motorola 19 Hex.

<available option> -> 'w'<decimal number> ;page width in columns(characters).

;(-,+ are ignored but one must be

; there).

<available option> -> 'h'<decimal number> ;page height in lines.

;(-,+ are ignored but one must be

; there).

<available option> -> 'l' ;listing on(+) or off(-)

;if set on command line it overrides

;all listing controls in program.

<available option> -> 'm'<decimal number> ;Machine level.

;1 => z80,nsc800.

<available option> -> 's' ;symbol listing on(+) or off(-).

<available option> -> 'o' ;selects single object module

;file only(+), or multiple object

;module files(-)(one for each

;defined segment in the program).

;ONLY active on command line!

<available option> -> 't'<drive> ;specifies which drive to create

;all temporary files on(-,+ are

; ignored but one must be there).

;ONLY active on command line!

<available option> -> 'p'<drive> ;specifies which drive to create

;the listing file on(-,+ are

; ignored but one must be there).

;ONLY active on command line!

<drive> -> <drive name>':' ;e.g. a: b: c: d:

;MS-DOS

<drive name> -> 'a' ;drive a --usually a floppy disk

<drive name> -> 'b' ;drive b --usually a second floppy disk

<drive name> -> 'c' ;drive c --usually a hard disk, but may

be a ram disk.

<drive name> -> 'd' ;drive d --usually a ram disk, but may

be a hard disk.

** The default options are: -a2 -m1 -w132 -h66 +l +s +o

2. .org <integer expression> ;sets the assembler location counter

;to the value of expression.

;The expression MUST be evaluatable

;on the first pass. NO FORWARD

;REFERENCES!

3. .equ <identifier> ',' <integer expression>

;gives identifier the value of the

;integer expression.

;<identifier> canNOT be redefined!

;also forward references are allowed

;as long as they are resolved by the

;second pass.

4. .set <identifier> ',' <integer expression>

;gives identifier the value of the

;integer expression.

;<identifier> CAN be redefined later

; in the program!

;also forward references are allowed

;as long as they are resolved by the

;second pass.

5. .rs <integer expression> ;increments the location counter

;by the value of <integer expresson>

;effectively reserving that many bytes

;of memory.

6. .db <expression-string list>

<expression-string list> -> <expression>','<expression-string list>

<expression-string list> -> <string>','<expression-string list>

<expression-string list> -> <expression>

<expression-string list> -> <string>

;creates a byte in the machine code

;for each <expression> in the list

;and a byte for each ascii character

;in the a string.

7. .dw <expression list>

<expression list> -> <expression>','<expression list>

<expression list> -> <expression>

;creates a word(16 bit) in the machine code

;for each <expression> in the list.

;MOST significant byte is stored at LOWER

;address.

8. .drw <expression list>

<expression list> -> <expression>','<expression list>

<expression list> -> <expression>

;creates a word(16 bit) in the machine code

;for each <expression> in the list.

;LEAST significant byte is stored at LOWER

;address.

9. .eject ;causes a form-feed character to be

;inserted in listing.(new listing page)

10. .page ;increments location counter to next

;256 byte page boundary.

11. .end <integer expression> ;signals the end of the source program.

;the optional expression, if supplied,

;specifies the start address of the

;program, and is included in the

;Motorola Hex object module output

;of the active segment when the .end

;was encountered.

12. .opdef <identifier>,<identifier>

;assigns the current definition of

;the second <identifier> to the

;first <identifier>.

;useful for renaming opcodes and

;pseudo-ops.

13. .segment <identifier> ',' <integer expression>

;defines a memory segment name.

;used to separate memory allocation

;and optionally generate seperate

;object files.(see 'o' assembly

;directive to activate).

;(used to seperate RAM, ROM, or

; ROMS)

;the optional <integer expression> is

;added to the location counter to

;offset the load address supplied

;in the object module. (does not

;affect listings addresses!)

;

;note: .code is the predefined default

;segment and cannot be redefined.

14. <segment name> ;selects the segment <segment name>

;as the current memory segment.

;The location old segment location counter

;is saved and the previous value of the

;newly selected segments location counter

;is used(0 if not previously used).

15. .null ;directs the assembler to treat this

;statement as a comment. Useful to

;nullify opcodes when used in conjunction

;with the .opdef pseudo-op.

Appendix A ASCII character set

dec oct hex char dec oct hex char dec oct hex char dec oct hex char

0 000 00 ^@ null 32 040 20 sp 64 100 40 @ 96 140 60 `

1 001 01 ^A soh 33 041 21 ! 65 101 41 A 97 141 61 a

2 002 02 ^B stx 34 042 22 " 66 102 42 B 98 142 62 b

3 003 03 ^C etx 35 043 23 # 67 103 43 C 99 143 63 c

4 004 04 ^D eot 36 044 24 $ 68 104 44 D 100 144 64 d

5 005 05 ^E enq 37 045 25 % 69 105 45 E 101 145 65 e

6 006 06 ^F ack 38 046 26 & 70 106 46 F 102 146 66 f

7 007 07 ^G bel 39 047 27 ' 71 107 47 G 103 147 67 g

8 010 08 ^H bs 40 050 28 ( 72 110 48 H 104 150 68 h

9 011 09 ^I ht 41 051 29 ) 73 111 49 I 105 151 69 i

10 012 0A ^J lf 42 052 2A * 74 112 4A J 106 152 6A j

11 013 0B ^K vt 43 053 2B + 75 113 4B K 107 153 6B k

12 014 0C ^L ff 44 054 2C , 76 114 4C L 108 154 6C l

13 015 0D ^M cr 45 055 2D - 77 115 4D M 109 155 6D m

14 016 0E ^N so 46 056 2E . 78 116 4E N 110 156 6E n

15 017 0F ^O si 47 057 2F / 79 117 4F O 111 157 6F o

16 020 10 ^P dle 48 060 30 0 80 120 50 P 112 160 70 p

17 021 11 ^Q dc1 49 061 31 1 81 121 51 Q 113 161 71 q

18 022 12 ^R dc2 50 062 32 2 82 122 52 R 114 162 72 r

19 023 13 ^S dc3 51 063 33 3 83 123 53 S 115 163 73 s

20 024 14 ^T dc4 52 064 34 4 84 124 54 T 116 164 74 t

21 025 15 ^U nak 53 065 35 5 85 125 55 U 117 165 75 u

22 026 16 ^V syn 54 066 36 6 86 126 56 V 118 166 76 v

23 027 17 ^W etb 55 067 37 7 87 127 57 W 119 167 77 w

24 030 18 ^X can 56 070 38 8 88 130 58 X 120 170 78 x

25 031 19 ^Y em 57 071 39 9 89 131 59 Y 121 171 79 y

26 032 1A ^Z sub 58 072 3A : 90 132 5A Z 122 172 7A z

27 033 1B ^[ esc 59 073 3B ; 91 133 5B [ 123 173 7B

30 036 1E ^^ rs 62 076 3E > 94 136 5E ^ 126 176 7E ~

31 037 1F ^_ us 63 077 3F ? 95 137 5F _ 127 176 7F del

^ denotes control key simultaneous with character key.

Appendix B Copyright Information:

Disclaimer:

PseudoSam 80z is distributed as is, with no guarantee that it

will work correctly in all situations. In no event will the

Author be liable for any damages, including lost profits,

lost savings or other incidental or consequential damages

arising out of the use of or inability to use these

programs, even if the Author has been advised of the

possibility of such damages, or for any claim by any other

party.

Copyright Information:

The entire PseudoSam 80z distribution package, consisting of

the main program, documentation files, and various data and

utility files, is copyright (c) 1986, by PseudoCode.

The author reserves the exclusive right to distribute this

package, or any part thereof, for profit.

The name "PseudoSam (tm)", applied to an assembler

program, is a trade mark of the PseudoCode company.

PseudoSam version 1.x.xx and various subsidiary files may be

copied freely by individuals for non-commercial purposes. It

is expected that those who find the package useful will

purchase the update service.

ONLY UNMODIFIED VERSIONS DISPLAYING THE AUTHORS COPYRIGHT

MAY BE COPIED.

User groups and clubs are authorized to distribute PseudoSam

software under the following conditions:

1. No charge is made for the software or documentation. A

nominal distribution fee may be charged, provided that

it is no more than $5 total.

2. Recipients are to be informed of the user-supported

software concept, and encouraged to support it with

their donations.

3. The program and documentation are not modified in ANY

way, and are distributed together.

Interested manufacturers please see the commercial registration

form that follows to license PseudoSam 18 for bundling with

MS-DOS based development systems.

Distribution of PseudoSam 80z outside the United States is through

licensed distributors, on a royalty basis. Interested

distributors are invited to contact PseudoCode.

Educational Use:

Educational institutions are free to use this software

in their classes and are encouraged to distribute this

package to their students, however inorder to receive

periodic updates and technical assistance the appropriate

department must remit the license fee. Also a staff

member must be assigned to clear all trouble reports before

forwarding them to PseudoCode.

If you use this software, please help support it. Your

support can take three forms:

1. Become a registered user. The suggested payment for

registration is $30($100 for complete family).

2. Suggestions, comments, and bug reports.

3. Spread the word. Make copies for friends. Write the editor

of your favorite computer magazine. Astronomical advertising

costs are one big reason that commercial software is so over-

priced. To continue offering PseudoSam 80z this way, we need

your help in letting other people know about PseudoSam 80z.

Those who make the $30 payment to become registered users

receive the following benefits:(order form on next page)

1. One year of updates including any upgrades. This includes

at least one new version release even if it takes more than

one year.

2. User support by mail. Support is only available to registered

users. The address for help is given below.

3. Notices announcing the release of new products.

Attention:BUGS PseudoCode

P.O. Box 1423

Newport News, VA 23601

********ORDER FORM********

Please add me to the list of registered PseudoSam 80z users, and send me

the most recent version. I understand that registration entitles me to

one year of free updates and new releases, or one free new version

release, whichever occurs last.

Note that version 1.2.02 requires DOS 2 (or later) and 256K.

Computer Model: __________ ______ ____ _____

Diskette format: Total Memory: _______K

(256K required)

__ doubled sided/DOS 2

Check one:

___ I enclose a check for $30

(PseudoCode pays sales tax for VA orders)

Where did you hear about PseudoSam 80z? __________ ______ ____ _

Name: __________ ______ ____ _____ _______ ______ _________

Address: __________ ______ ____ _____ _______ ______ _________

City, State, Zip: __________ ______ ____ _______________

================================================================

Send order form with check or money order payable to PseudoCode to:

(Qualified PO's will be billed.)

Attention: Registration PseudoCode

P.O. Box 1423

Newport News, VA 23601

********ORDER FORM********

Please add me to the list of registered users of the complete

PseudoSam family of cross-assemblers. Send me the most recent

versions. I understand that registration entitles me to

one year of free updates and new releases, or one free new

version release, whichever occurs last.

I note that version 1.2.02 requires DOS 2 (or later) and 256K.

Computer Model: __________ ______ ____ _____

Diskette format: Total Memory: _______K

(256K required)

__ single sided/DOS 2(360k)

Check one:

___ I enclose a check or money order for $100

(shipping, handling, and Virginia sales tax for VA orders

is paid by PseudoCode).

Where did you hear about the PseudoSam family? _____ _______ ______ _________

Name: __________ ______ ____ _____ _______ ______ _________

Address: __________ ______ ____ _____ _______ ______ _________

City, State, Zip: __________ ______ ____ _______________

================================================================

Send order form with check or money order payable to PseudoCode to:

(Qualified PO's will be billed.)

Attention: Registration PseudoCode

P.O. Box 1423

Newport News, VA 23601

********Commercial Distribution Agreement********

Please add me to the list of registered PseudoSam 80z distributors, and

send me the most recent version. I understand that registration entitles

me to distribute this package freely on an "as is" basis to purchasers

of my products. I further understand that I may not make a specific or

additional charge for this package. I may however advertise the package

as free software. I fully understand that the distributed software

must be clearly labeled as follows:

Complementary Software

Distributed "AS IS"

PseudoCode

P.O. Box 1423

Newport News, VA 23601

I understand that this agreement entitles me to one year of distribution

rights and free updates.

Note that version 1.2.02 requires DOS 2 (or later) and 256K.

Computer Model: __________ ______ ____ _____

Diskette format: Total Memory: _______K

(256K required)

__ doubled sided/DOS 2

Check one:

___ I enclose a check for $30

(PseudoCode pays sales tax for VA orders)

Where did you hear about PseudoSam 80z? __________ ______ ____ _

Name: __________ ______ ____ _____ _______ ______ _________

Address: __________ ______ ____ _____ _______ ______ _________

City, State, Zip: __________ ______ ____ _______________

Signature_____ _______ ______ ________ Date_________________

================================================================

Send order form with check or money order payable to PseudoCode to:

(Qualified PO's will be billed.)

Attention: Registration PseudoCode

P.O. Box 1423

Newport News, VA 23601

********Commercial Distribution Agreement********

Please add me to the list of registered PseudoSam distributors, and

send me the most recent version. I understand that registration entitles

me to distribute this package freely on an "as is" basis to purchasers

of my products. I further understand that I may not make a specific or

additional charge for this package. I may however advertise the package

as free software. I fully understand that the distributed software

must be clearly labeled as follows:

Complementary Software

Distributed "AS IS"

PseudoCode

P.O. Box 1423

Newport News, VA 23601

I understand that this agreement entitles me to one year of distribution

rights and free updates for the entire PseudoSam family of products.

I note that version 1.2.02 requires DOS 2 (or later) and 256K.

Computer Model: __________ ______ ____ _____

Diskette format: Total Memory: _______K

(256K required)

__ single sided/DOS 2(360k)

Check one:

___ I enclose a check or money order for $100

(shipping, handling, and Virginia sales tax for VA orders

is paid by PseudoCode).

Where did you hear about the PseudoSam family? _____ _______ ______ _________

Name: __________ ______ ____ _____ _______ ______ _________

Address: __________ ______ ____ _____ _______ ______ _________

City, State, Zip: __________ ______ ____ _______________

Signature_____ _______ ______ ________ Date_________________

================================================================

Send order form with check or money order payable to PseudoCode to:

(Qualified PO's will be billed.)

Attention: Registration PseudoCode

P.O. Box 1423

Newport News, VA 23601

The PsuedoSam Family consists of the following cross-assemblers

Name Designed for Available* V1.1.00

PseudoSam 48 ;Intel 8048 family. Now

PseudoSam 51 ;Intel 8051 family. Now

PsuedoSam 96 ;Intel 8096 family. Now

PseudoSam 68 ;Motorola

;6800,01,02,03,08. Now

PseudoSam 685 ;Motorola 6805. Now

PsuedoSam 69 ;Motorola 6809. Now

PseudoSam 65 ;6502. Now

PseudoSam 85 ;Intel 8080,8085. Now

PseudoSam 80z ;Zilog Z80, NSC800. Now

PseudoSam 18 ;RCA 1802. Now

PseudoSam 32 ;NSC 32000 Family. Apr 87

PseudoSam 68k ;Motorola 68000 family. May 87

* PseudoCode reserves the right to change price and availability

of any product without notice.

Appendix C: Description of Files

Your PseudoSam 80z distribution disk contains a number of files. This

appendix will give a brief statement of the purpose of each of the

files.

FILE DESCRIPTION

-------- ----- ------ ----- ----- --------- ----- -------

A80z.COM The PseudoSam 80z program.

A80z.DOC This document.

EXAMPLE.ASM Sample source file.

MNEMTEST.ASM Mnemnonics test file.

SYN.ASM Useful mnemnonics redefinitions

COMRCIAL.USE Commercial distribution agreement.

Occasionally, various other sample source files for PseudoSam 80z will be

distributed. These files will have extension ASM, and will be

accompanied by a corresponding DOC file.

Appendix D: Bug Reporting Procedure.

Although each version of PseudoSam 80z is tested extensively prior

to release, any program is bound to contain a few bugs. It is

the intention of PseudoCode to correct any genuine problem that

is reported.

If you think you have found a bug in PseudoSam 80z, please take the time

to report it for correction. Although any report is helpful,

correction of the problem will be easiest if you provide the

following:

1. The version of PseudoSam 80z you are using. Your problem may have

been fixed already.

2. A brief description of the problem.

3. A copy of the problem source file, preferably on a floppy disk.

(The cost of floppies is so small($.29), they will not be

returned and become the property of PseudoCode.)

* It is NOT necessary to send a large program to demonstrate

problem. Please try to isolate the problem area, by

writing a short sample program that demonstrates the bug.

Attention:BUGS PseudoCode

P.O. Box 1423

Newport News, VA 23601

Appendix E Using PseudoSam 80z on "Compatible" Systems.

PseudoSam 80z was written specifically for the IBM PC, but should

function normally on true "compatibles".

Since PseudoSam 80z version 1.2.00 is a totally new program, little

compatibility data is currently available. If you are using (or

are unable to use...) PseudoSam 80z on a non-IBM computer, please

write with your experiences. Does PseudoSam 80z work correctly on

your system? Are there specific problem areas? Can they be worked

around?

The following systems are known to run PseudoSam 80z version 1.2.00

successfully:

IBM PC

IBM XT

IBM AT

Sperry PC (all models).

JDR Microdevices PC Clones.


Document Info


Accesari: 2065
Apreciat: hand-up

Comenteaza documentul:

Nu esti inregistrat
Trebuie sa fii utilizator inregistrat pentru a putea comenta


Creaza cont nou

A fost util?

Daca documentul a fost util si crezi ca merita
sa adaugi un link catre el la tine in site


in pagina web a site-ului tau.




eCoduri.com - coduri postale, contabile, CAEN sau bancare

Politica de confidentialitate | Termenii si conditii de utilizare




Copyright © Contact (SCRIGROUP Int. 2024 )