|
Replacing COMCTL32.OCX:
SOLUTION:
In order to fix this problem, you'll need to set up and register the library
file.
The easiest way to do that is to download the following file that will
install and register most of the Library Files used by Ascentive's pro 24524y242y ducts
(if you still see the error, try the manual instructions below).
Please use the following
URL to download a 5.66 MB (5,935,720 bytes) Ascentive Library Installer.
https://www.ascentive.com/support/new/libraryfiles.exe
Right click
on the above link and select "Save target as..."
Alternatively, you may download just the file you are missing and
manually register it yourself. Here's how to do it:
Download
COMCTL32.OCX
(right click the text on the left and save to your Desktop).
Back up your current copy of
COMCTL32.OCX and copy the new version to the same file location. This file
should be located in the WINDOWS\SYSTEM directory on your C: drive (for
Windows NT and 2000: \WINNT\system32).
Using your mouse, click on the
"Start" button and then click on "Run".
According to your Operating
System, type the following command to register this library file:
Windows 95, 98, or Me:
regsvr32 \windows\system\COMCTL32.OCX
Windows NT or 2000:
regsvr32 \WINNT\system32\COMCTL32.OCX
Windows XP:
regsvr32 \windows\system32\COMCTL32.OCX
You should see a message saying
"DllRegisterServer ... succeeded"
If you
are getting an error telling you that the file is missing, then you are not
typing the command in correctly. You will need to type it in *exactly* as as
shown above for your operating system.
* Please note that there is a SPACE after "regsvr32"
and before the rest of the command.
You should probably copy and
paste the command so that you are unable to mistype it.
Download COMCTL32.OCX
now (right-click on the link and select "Save Target as...").
|
