The Process of making Hash Oil
It is easy to make tinture or oil out of cannabis which consists out of the active components of the plant. For this you need cannabis (any quality, good or bad, leafs or buds), ethyl alcohol 96-99% from the pharmacy, a glass jar which can get locked (for example a jam jar), a coffee filte 19319v2115t r or a piece of textile (for example of a t-shirt), a deep plate or frying pan and a little bottle with drop counter.
Crumble the cannabis into little pieces and put them in the jam jar. Fill it with enough alcohol. Keep it in a cool and dark place for about week .Shake it every day a little bit. Filter it through the coffee filter or piece of textile. Push the plant material out to the last drop. You can repeat this process a couple of times, at least one time, better two times: put the cannabis again in the jam jar and poor it again with alcohol. After that you will put the alcohol (the colour of it will be green) in the deep plate. Keep it by a soft temperature on an airy place so the alcohol can evaporate and so will the concentration of the cannabis get higher. This will take about 10 days. Put the extract in the bottle with drop counter if enough alcohol is evaporated.
The cannabis tinture can be used immediately in a liquid, food or vaporized it. Before the evaporating of the tincture can a commercial vaporizer be used or you can work with the old tinfoil method. Form a teaspoon with the tinfoil and put some drops of tincture in it. Heat it gently with a candle till it starts evaporating. Inhale with help from a little tube, like a drinking straw.
The alcohol should already be evaporating into a dark paste before the making of hash oil itself. (Almost like tar) You also can put the glass in a warm place to quicken the evaporating process. But don't put it in the sun because the effect of the THC will drop this way. Also don't overheat it if you want to avoid the explosion of the alcohol.
|
